Home
Child Gates
Electrical Outlet
Door Locks
Finger Protection
Appliance & Toilet
Door Cabinet Locks
Portable Bed
Assorted Products
Contact Us
   
 
 
Free  UPS Ground shipping in the Continual USA only. Any other form of shipping (To AK, HI, APO’s & Canada)  will be added to your total purchase price. Orders in the continual USA totaling under $100.00 will ship USPS ground at a fixed cost of $9.99. Sorry, we do not ship out of the USA & Canada

 

KidCo G80 Config Gate

KidCo ConfigureGate G-80 Extra Wide Pet Gates

The KidCo G80 Config gate is a great solution for the odd-shaped space or irregular rooms that does not have mounting points straight across. The G80 ConfigureGate Pet Gate is the only "build your own" gate system. It is the only fully expandable pet gate that requires no support in the center on very long lengths. This KidCo expandable pet gate is the answer to many common problems like gating across a driveway or putting the G-80 configure gate across a garage door opening.

This KidCo G-80 Config gate has three 24" interlocking sections adjust in 10° increments and can be angled or set in a straight line as needed. Included with this pet gate is the three piece basic set and the walk through gate section that opens easily in either direction with a one hand adult release.

The KidCo G80 Configure gate is wall mounted to be strong and safe. The G-80 Configure Gate is expandable to almost any length. It is also freestanding in the long center sections (requiring no extra center support). The G80 Config Gate is constructed of strong tubular steel with white non-toxic coating that is warm to the touch and easy to clean. At 29½" high, it's great for both children and pets. Available in white only. The size between bars for this gate are 2 ¼ inches. This gate comes with hardware to mount it on any solid surface. You need additional Installation kit(s) if you mount the gate on other surfaces - see below

G80
The ConfigureGate
Regular Price $149.99
Our Price - $118.99
FREE SHIPPING

Features of Kidco Configure Gate
Hardware mounted metal gate
For anywhere in the house
Perfect for irregular shaped areas
One hand operation
Swings in either direction
Wall mounted for extra security
Three 24 inch interlocking sections adjust in 10 degree increments
Sections can be angled or set in a straight line as needed
Included in the 3 piece basic set is a walk through gate section
Works with extensions G80-24 and G80-8
Extensions are either 24 or 8 inch sections
Pivoting hinges provide layout flexibility
Quick release hardware for temporary removal
Simple assembly is required
Appropriate for children 6 months through 24 months
Perfect for pets too
29 1/2 inches high, and 24 inches wide
Please be sure to measure the opening you will be using this gate for prior to purchasing to insure a proper fitment

Optional Extension Kits

Model G80-24" Optional Extension
One Optional Extention for openings 5' to 7'
Two Optional Extensions for openings 7' to 9'
Three Optional Extensions for openings 9' to 11'
Four Optional Extensions for openings 11' to 13'
The G80 has no limit to the extensions you can add!

G80-8
8" Extension Kit
Regular Price $39.99
Our Price - $26.99
G80-24
24" Extension Kit
Regular Price $49.99
Our Price - $36.99

K10
Safety Gate
Installation Kit
Regular Price $19.99
Our Price - $14.99
KidCo G80 Configure Gate Installation Kit

This kit IS NOT Required if you are doing a standard wall mount. The G80 Configure Gates comes with all hardware needed for a standard wall mount. The K-10 pet gate installation kit is required for pet gate installation not being mounted to solid walls or door ways. This K-10 pet gate kit includes the materials and fasteners necessary to install the pet gate to wood banisters, hollow walls, or wrought iron. More than one kit may be necessary, as in the case of wrought iron you need one kit for each side.

KidCo has assembled the materials and fasteners necessary to properly install any pet gate to wood banisters, hollow wall (drywall) or wrought iron. The KidCo Pet Gate Installation Kit can save several trips to the hardware store. When mounting the pet gates to unusual surfaces such as brick or concrete, KidCo recommends that you consult a hardware professional.

One kit is required for each side of the pet gate that is not being mounted into a solid vertical wood surface and only the most basic tools are needed to assemble any good pet safety gate.

Pictures show the following types of installations:

User Guide (PDF )

In order to read the manual, you must have Adobe's Acrobat Reader. You may already have it, but if you don't, you can download a FREE copy here.

Kidco extra wide G80 Configure Gate
Kidco extra wide G80 Configure Gate
Wood Banister Installation using plastic ties
Wood Banister Installation using wood screws

Kidco extra wide G80 Configure Gate
Hollow Wall (Drywall) Installation
Wrought Iron Installation

Measuring is as easy as:

1. Simply determine the area to protect or isolate.
2. Place objects at 24" intervals along the line of the intended gate configuration. If there is a space that is too small for a 24" segment, use an 8" segment.
3. Count the number of 24" and 8" segments to determine the number of extensions needed.